Description

About a 10m Irrigation System Solar water Pump

10m Irrigation System Solar water Pump

Model number: VC-80

DC IRRIGATION SYSTEM PUMP BRUSH-TYPE

A 10m Irrigation System Solar water Pump, VC-80 DC irrigation system pump (brush-type) is a type of electric pump powered by direct current (DC) and equipped with a brushed motor. These pumps are widely used for agricultural irrigation, gardening, and small-scale water supply systems. Here’s an overview of its features and operation:

Key Features of an Irrigation System Solar Water Pump Brush-Type:

1. Power Source:
   • Operates on a DC power supply, typically from batteries or solar panels.
   • Suitable for remote areas without access to grid electricity.
2. Motor Type:
   • Uses a brushed motor where electrical current is delivered to the motor through brushes and a commutator.
   • Brushed motors are simple, cost-effective, and widely used.
3. Performance:
   • Offers steady water flow suitable for small to medium irrigation needs.
   • Pumping capacity varies depending on the model, ranging from a few liters per minute to higher outputs.
4. Applications:
   • Primarily used for irrigation in agriculture.
   • Can also serve in gardening, fish farming, and small-scale water transfer applications.
5. Advantages:
   • Affordable compared to brushless or AC-powered models.
   • Compatible with off-grid solutions like solar panels.
   • Easy to maintain with replaceable brushes.

How an Irrigation System Pump Works:

• The pump consists of an electric motor (DC brushed) connected to an impeller or a diaphragm mechanism.
• When powered, the motor drives the impeller or diaphragm, creating suction to draw water and discharge it at a higher pressure.
• The flow rate and pressure depend on the pump’s specifications and the power supplied.

Maintenance Tips:

1. Brush Replacement:
   • Regularly check and replace the brushes as they wear down with use.
2. Keep Clean:
   • Ensure the pump is free from debris or dirt to avoid damage.
3. Prevent Dry Runs:
   • Do not operate the pump without water to prevent overheating or damage to the internal components.